Irem是一家意大利公司，成立于1947年，是全球领先的电力控制和发电设备设计和制造公司。

IREM意大利公司，成立于1947年

马里奥·塞尔索科学技术奖

我们的历史

IREM是一家意大利公司，成立于1947年，是全球领先的电力控制和发电设备设计和制造公司。

IREM产品广泛应用于电能质量、节能、水电、专业照明等领域。

其杰出的创始人Mario Celso，作为一个对电气工程和电影充满热情的男孩，在40年代末成功地实现了他童年的梦想，创造了第一台用于电影放映的碳弧机电整流器。

从这第一个整流器，一个全面的产品线，专门为电力和罢工气体放电灯将形成。

不久，随着电压稳定器的引入，生产得到了加强，开始了一系列旨在快速发展到能够解决电源问题的全系列设备的产品。

在50年代，除了能源管理之外，IREM还进入了能源生产机器领域:第一台水力涡轮机，能够利用水头和水流产生可再生能源

设计和生产。

1992年，马里奥·塞尔索获得洛杉矶电影艺术与科学学院颁发的科学技术奖，以表彰他对电影工业发展的技术贡献。

认证

今天，IREM是国际市场上的主角。在研发方面的持续投资使我们能够通过不断开发能够满足知名客户需求的创新产品来保持最高的质量标准。

质量、安全和环境是IREM自成立以来一直追求的企业价值观，是其组织和发展的基础。

AD SERIES

H.V. IGNITERS FOR METAL HALIDE LAMPS

A complete range of high voltage igniters expressly designed to strike single and double ended metal halide lamps from 200 to 18000W.

These symmetrical igniters have been designed to be supplied from AC mains line and they are characterized by a compact design, high thermal stability, galvanic insulation and a low noise level. The technical characteristics of all models comply with the specification of the different lamps manufacturers.

The igniters are available with different H.V. poles positions and they are equipped with isolated bushings that make them suitable for a wide variety of applications, including compact and portable lighting systems.

These units should be installed close to the lamp, but thermally shielded from it. The high voltage lead must be as short as possible and carefully insulated to prevent corona discharge and reduction in strike energy. They must be grounded for proper interferences suppression.

广告系列

金属卤化物灯用高压点火器

全系列高压点火器，专门设计用于打击200至18000W的单端和双端金属卤化物灯。

这些对称点火器被设计为由交流电源供电，其特点是设计紧凑，热稳定性高，电绝缘和低噪音水平。所有型号的技术特性符合不同灯具制造商的规格。

点火器可与不同的高压杆位置，他们配备了隔离的套管，使其适用于各种各样的应用，包括紧凑和便携式照明系统。

这些装置应该安装在靠近灯的地方，但要热屏蔽。高压引线必须尽可能短，并仔细绝缘，以防止电晕放电和减少冲击能量。为了适当地抑制干扰，它们必须接地。

AD SERIES
H.V. IGNITERS FOR METAL HALIDE LAMPS

1) The igniters can be connected as follows: 1Ph+N+PE or 2Ph+PE
2) The power losses have been measured at nominal lamp current value
3) The size “d” is referred to the igniter insulating bushing All igniters are equipped with isolation bushings and tin soldering contacts. They are supplied without H.V. cables.
Different input voltages or frequencies are available on demand.
IREM holds the right to modify the present datasheet without any prior notice

AD SERIES

1) The igniters can be connected as follows: 1Ph+N+PE or 2Ph+PE
2) The power losses have been measured at nominal lamp current value
3) The size “d” is referred to the igniter insulating bushing
All igniters are equipped with isolation bushings and tin soldering contacts. They are supplied without H.V. cables. Different input voltages or frequencies are available on demand.

IREM holds the right to modify the present datasheet without any prior notice

AD SERIES

1) The igniters can be connected as follows: 1Ph+N+PE or 2Ph+PE
2) The power losses have been measured at nominal lamp current value
3) The size “d” is referred to the igniter insulating bushing
All igniters are equipped with isolation bushings and tin soldering contacts. They are supplied without H.V. cables.

Different input voltages or frequencies are available on demand.

IREM holds the right to modify the present datasheet without any prior notice